Sony URX-P03D 2 Channel Portable Receiver

UWP-D digital audio processing for high quality sound

The UWP-D Series wireless microphone systems uses Sony Digital Audio Processing to improve sound quality and transient response performance compared to conventional analogue wireless systems. It provides superb transient response performance. Analogue companding systems cannot accurately reproduce sounds such as a bell, tee shot or handclap, but Sony Digital Audio Processing reproduces them faithfully.

External mic input for additional wired microphone with 3 channel Mixer Function

The URX-P03D 2-channel portable receiver has an external mic input connector for additional wired microphones. Sony microphones with BMP plug or plug-in power microphones (stereo/mono) are applicable by menu setting. It also has a 3 channel mixer function for the two wireless microphones and one wired microphone. It can assign output 1 or/and 2 freely.

Large display and small size receiver

This receiver is designed to fit even small camcorders or DSLR cameras, with dimensions of 63mm x 82mm x 28.4mm (W x H x D) and a weight of approx. 210 g (including batteries). The transmitters and receivers also feature a bright 11.5mm x 27.8mm display, significantly larger than previous UWP models to make them easily readable in all situations.

Fast and easy channel scan

With its Clear Channel Scan, Active Channel Scan function and IR Sync features, the system detects unoccupied channels and selects the most appropriate channel automatically, for fast and easy system setup.

Automatic channel setting mode

The Auto Set channel mode allows the user to find and set available frequencies to use within the operating frequencies of the system. The receiver will automatically set the transmitter channel using the IR Sync feature.

Wide frequency coverage

The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across multiple models - please refer to product specifications for more information.

True diversity reception system*

The UWP-D system achieves exceptionally stable audio signal being delivered from two independent receiver sections within the unit. Optimum signal quality is delivered by the two receivers sections and a comparison circuit constantly pulls the one with the best signal to give dropout free transmission.
*Applied for 1 channel use. Antenna diversity is applied for 2 channel use.

Compatibility with Sony 800 and UWP Series analogue audio receivers

The UWP-D Series transmitters and receivers are also compatible with Sony’s WL-800 Series, UWP Series and Freedom Series, allowing users to switch between different companding modes.

Headphone output for monitoring

The UWP-D system provides its own headphone output socket, which is particularly useful when working with a camera that does not have a headphone output.

USB for external power supply or charging batteries

The URX-P03 portable receiver has a micro USB terminal for connection to USB external portable power sources allowing the unit to be powered by the camcorder during use, resulting in hassle free power. You can also load NiMh batteries into the receiver to be charged through the micro USB.

Robust metal body

The URX-P03 portable receiver is made of strong, durable metal. Metal construction supports reliable use in rough operating conditions.

Variable output level on portable receiver

The system provides variable output level control of ±12dB, for use with the various input levels of camcorders and DSLR cameras.

   

Oscillator Type	Crystal-controlled PLL Synthesizer
Reception Type	True diversity*
Antenna Type	1/4 wave length wire
Carrier Frequencies:	CE33: 566.025 MHz to 633.000 MHz (other variants available to order)
Frequency Response	23Hz to 18kHz (typical)
Signal-to-Noise Ratio	96dB (max deviation, A-weighted)
Distortion (T.H.D)	0.9% or less (-60dBV, 1kHz input)
Audio Delay	Approx. 0.375 msec
Analog Input	3-pole mini jack, unbalanced
Analog Input Level	-50dBV (12dB Adjustable, 3-dB step)
Analog Output	3-pole mini jack, unbalanced
Analog Output Level	-60dBV (at 5kHz deviation)
Analog Output Adjust Range	-12dB - +12dB (3dB step)
Headphone Output	3.5 mm ( 5/32 inch) stereo mini jack
Headphone Output Level	5 mW (at 16-ohm load) (Please amend URX-P03 too)
Pilot Tone Signal	32 kHz/ 32.382 kHz/ 32.768 kHz
Display	LCD
Power Requirements	DC 3.0 V (with two AA-size alkaline (LR6) batteries)
	DC 5.0V (via USB micro-B)
Battery Operating Time	Approx. six hours for 2 channel use / eight hours for 1 channel use with Sony's AA-size alkaline (LR6) batteries at 25C(77F)
Operating Temperature	0C to 50C, 32F to 122F
Storage/Transport Temperature	-20C to +55C, -4F to +131F
Dimensions	63 x 82 x 28.4 mm (excluding the anntenas) (W x H x D)
MassApprox.	210 g (including batteries)