HEDBOX RP-DC50 Digital Dual Professional Battery Charger + Plates

Hedbox
SKU:
HED-RP-DC50
Availability:
Available for Next Working Day Delivery
£62.39 (Inc. VAT)
£51.99 (Ex. VAT)
Current Stock:
Adding to cart… The item has been added

RP-DC50 Digital Dual Professional Battery Charger.

Conveniently charges two professional batteries that run on 14.4V. This could be the HEDBOX HED-BP95D or Sony BP-U Style Simultaneously. Drawing power from either an AC wall source (an AC cord is included) or a 12/24V DC power source, making the unit versitile. A DC car charger needs to be ordered separately.

Additionally, the dual professional battery charger features a USB Power Output. This can be to charge other devices with a USB Power Input, with powerful 2.1A Output. With protection against overcharging, overheating, and short circuit. The duo charger safely, conveniently, and quickly recharges up to two professional Li-ion batteries.

Implemented Back-light

With an implemented back-light in the large LCD screen, the readout function is enabled in the dark. Giving you the possibility to use the charger at any place and at any time.

Large LCD Display Screen

A large LCD screen provides clear, accurate, and precise display of the charging status. The USB output and DC 12V input display charge mode provide a clear insight into the way in which the charging mode is used to charge your professional battery. With an implemented backlight, the readout function is enabled in the dark.

Dual Bay Charging Option

Option to charge one or two batteries simultaneously in the same time. Intelligent Control MCU can automatically identify the voltage and number of batteries that is put on the charger.

Charging Technologies

Intelligent charging systems integrate the control systems, allow precision control over the charging process.  The charging cycle is initiated with a low current. If there is no corresponding rise in the battery voltage, it indicates that there is possibly a short circuit in the battery (zero volt activation). Constant current/constant voltage (CC/CV) charging mode is an effective way to charge lithium batteries.

Safety

As a safety precaution with high-capacity batteries, a pre-charging stage is used. Charger CPU automatically adjusts charging current to be lower than the max charging current that the battery can accept. With constant charging, the voltage of the battery rises slowly until it reaches a maximum voltage. At which point the charger switches the charging method to “constant voltage” and reduces the charging current. When the battery is fully charged, this state is stopped, which is deemed a safe method of charging.

Charging Time

Intelligent Control MCU can automatically identify the voltage and number of batteries that are on the charger, and prevent overcharge depending of the charging mode that is selected. In HIGH charging mode, one professional battery like the HED-BP75D with 74.88 Wh will be charged in approximately 3.5 hours. Two HED-BP75D will be charged in approximately 6.5 hours. In LOW mode, the charging time for a single battery is 5.2 hours or 10.2 hours for two batteries.

Boost Charging Mode

Boost Charging Push button provide HIGH speed Charging Mode. In High speed charging Mode, charger provide 1.5A current Power per one battery Slot or 0.8A per two Battery Slots. In standard Charging Mode the current power is 1A per one slot and 0.5A per two slots. When Boost Charging mode is active it will be displayed on the Charger LCD Display. In this charging mode, you can faster charge your battery pack, for when you are most pressed for time.

In Car Use

With 12V-24V DC power source (a DC 12V Car charger need to order separately) you can use charger and charge your batteries in the Car, Airplane, Bus or any other place where 12V-24V DC power is supplied.

NOTE: When using Battery Charger Plate RP-DBPU ( For Charging HED-BP75D or HED-BP95D or any other 14.4V battery) you need to power RP-DC50 with 24V DC Power Supply.

Interchangeable Battery Plates

With easily Interchangeable Battery Plates (They are designed to use only with Digital Chargers model RP-DC50, RP-DC40 and RP-DC30). 

This Economic Option allows you to charge many different batteries. All with one charger, according to the plate model. Charger automatically sets Charging Voltage and the Charging Current for the designed Battery Pack. That leaves no space for charging error!

 

Model : RP-DC50 Intelligent Dual Digital LCD Battery Charger
AC Power In : AC 110 – 240V , 50/60Hz
DC Power In : DC 12 – 24V
Power Consumption : Max 55W
Power Output 1 : DC 8.4V – 16.8V / 1500mA Boost Power / 800mA Standard (auto-change the voltage according to the installed optional charging plate)
Power Output 2 : DC 8.4V – 16.8V / 1500mA Boost Power / 800mA Standard (auto-change the voltage according to the installed optional charging plate)
DC Power Input : DC 12V – 24V / 45W
USB Output : 5V, 10W / 2.1A (Max)
Charging Type : Ni-CD , Ni-MH , Li-Ion
Operating Temperature : –20°C to +45°C (–4°F to +113°F)
Dimensions (WxDxH) : 124 x 114 x 445 mm
Weight : 218 g
Charging Method : RP-DC50 use optional changing plates according to the Battery Pack Manufacturer and Model