RF Distribution

The A10-RACK has an integrated RF distribution amplifier. Its two RF inputs offer selectable 12 V powering for active antennas, plus loop-thru connections for another A10-RACK. A single pair of antennas can be used for up to 16 audio channels.

Powering

The A10-RACK is powered from standard 4-pin XLR, 10-18 VDC power supplies, such as Sound Devices XL-WP4 (shown right). Power supplies require 3 amps (minimum) for proper powering of the A10-RACK and connected slot receivers.

• XL-WP4 PSU not included
• Power Supply (Sold Separately)

Wavetool

The Audio Limited A10-RACK is compatible with Wavemark’s Wavetool for iOS and Mac. Wavetool uses a computer, phone or tablet to display key information for the A10-RX, such as RF status, RF frequency, TX battery levels, and audio signal history. With many features in one application, Wavetool makes it easy to troubleshoot issues remotely.

 

 

RF Frequency Range	470-694 MHz
Number of Receivers	four two-channel, diversity receivers
Active Distribution Amplifier Bandwidth	224 MHz, with powering for active antennas (12 V, 200 mA)
Antenna Inputs	2 x BNC 50 Ohms
RF Outputs	2 x BNC 50 Ohms
Power	10–18 Volts DC, 3 amps via 4-pin XLR male
Audio Outputs	8 x 3 pin XLR-M (analogue and/or AES3)
Dante Output	2 x RJ45 to provide Dante™ primary and secondary
Output, Analogue	+18 dBu maximum, balanced
Output, Digital	AES3, transformer-balanced
Audio Frequency Response	20-20,000 Hz ±1 dB
Service Port	USB type B
Dimensions (H x W x D)	442 mm x 210 mm x 45 mm (without rack ears), 1 RU
Weight (without receivers)	3.6 kg