Bright Tangerine DJI/Manfrotto Receiver for 15mm & 19mm Studio

Bright Tangerine DJI/Manfrotto Receiver for 15mm & 19mm Studio

Need a stable mount for DJI dovetails? Our DJI/Manfrotto Receiver is the perfect choice. Mounting to LeftField 3 15mm Studio and 19mm Studio baseplates (or alternatively any 1/4"" or 3/8” screw), you can conveniently transfer your setup between mounts.

When paired with our bestselling Universal Dovetail and the new Fujifilm GFX ETERNA, you can easily set your camera to the standard height on either baseplate.

Studio Shooting

Want to quickly release your camera from a studio setup? The Receiver is the perfect choice. With it installed, you can slide your camera body on and off your baseplate – for quick adjustments or moving to less complex setups. The Receiver can be used with our LeftField 3 15mm Studio or 19mm Studio Baseplates.

Dual Compatibility

The Receiver is capable of holding both DJI RS and Manfrotto 501PL dovetail plates. It features a clamp for tightly securing the dovetails in place, as well as dual safety stops to avoid unwanted detachment. This allows you to balance the camera setup within the Receiver, whilst still offering quick-release convenience.

ETERNA Compatible

If you’re wanting to use the Fujifilm GFX ETERNA in a large-scale production, the DJI/Manfrotto Receiver offers more than just quick release. Coupled with our Universal Dovetail, the Receiver sets the ETERNA to the correct height for either studio setup.

Compatibility

The DJI/Manfrotto Receiver is compatible with both our LeftField 3 15mm Studio Baseplate and our LeftField 3 19mm Studio Baseplate. However, the Receiver can also be mounted via any standard 1/4"" and 3/8” screws via its central screw threads.

The Receiver is compatible with both DJI and Manfrotto standard dovetails – including our Universal Dovetail that serves dual capabilities as both.

Fujifilm GFX ETERNA shooters can combine the Receiver, Universal Dovetail and either baseplate to set their camera to the correct optical height. Other camera systems will not be the correct height and will require a compatible Riser Shim.

Part of the LeftField System

The LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.

Instructions/Assembly

The DJI/Manfrotto Receiver comes with the required screws and washers. You will need a flathead screwdriver in order to install.

1. Align the washers with the two 3/8” threads on bottom of the camera-right side of your Baseplate.
2. Align the Receiver on top of the Baseplate with the clamp also on the camera-right side.
3. Insert the two 3/8” screws through the Baseplate and Receiver, and tighten them with a flathead screwdriver.