Bright Tangerine Fujifilm GFX ETERNA Side Rib

Bright Tangerine Fujifilm GFX ETERNA Side Rib

Looking to complete your cage? Look no further than the Fujifilm GFX ETERNA Side Rib, which offers convenient side mounting for your rig without blocking anything off. Pair with our Top Plate and Side Rib Brace to form a rigid cage around your ETERNA, with a selection of accessory mounting options.

Compatible with vertical filmmaking setups via our Vertical Adaptor, the Side Rib is low-profile yet versatile for any setup.

Ready for Rigging

The Side Rib offers you freedom for customising your ETERNA. With 1/4"" and 3/8” threads as well as an integrated NATO rail, you can secure anything to the side of your setup. Each of the screw mounts features ARRI anti-twist pin threads and the NATO rail has a built-in safety, meaning that your attached accessories won’t budge.

Complete Your Cage

The Side Rib can be mounted to either side of the ETERNA via the ETERNA Top Plate (Front) and the Side Rib Brace – with both having dedicated mounting points for the Side Rib. This allows you to form a rigid rig - able to take all the wear-and-tear of set life without flexing.

Easy Access

Rather than a bolt-on side plate, the ETERNA Side Rib is offset from the camera body. This means that you still have access to inputs and buttons on the camera interface, even with accessories attached.

Vertical Mounting

Want to shoot high-quality social content? You’re just a few steps away. Pair the Side Rib with our Rear Side Plate and Vertical Adaptor to quickly put the ETERNA at a right-angle, ready for vertical dramas or rapid-fire reels in moments. The Side Rib and Rear Side Plate mount to the right-hand side of the camera, with the Vertical Adaptor bridging them.

Built to Last

The Side Rib is designed and manufactured to our signature high quality standard. Made from aerospace-grade aluminium, which is hard-anodised for durability whilst maintaining a light weight. For everything from run-and-gun rigs to full-fledged cinema setups, this is the ideal partner piece to your ETERNA.

Compatibility

The Fujifilm GFX ETERNA Side Rib is designed to fit the GFX ETERNA camera only, precisely fitting the dimensions of the camera body. It is mounted to the dedicated Top Plate and Side Rib Brace, with a range of accessory mounting options.

Part of the Fujifilm System

Bright Tangerine’s range of accessories for the Fujifilm GFX ETERNA are precision-engineered to maximise freedom and minimise downtime. Wear and corrosion-resistant; each accessory is made by a combination of expert designers, engineers and – of course – filmmakers.

Instructions/Assembly

The Fujifilm GFX ETERNA Side Rib comes with all required screws. You will require the Fujifilm GFX ETERNA Top Plate (Front), the Fujifilm GFX ETERNA Side Rib Brace and a 4mm Hex Key.

Side Rib to Top Plate

1. Align the Side Rib with the left or right lip on the Top Plate.
2. Use a 4mm Hex Key to tighten the screw into place.

Side Rib to Side Rib Brace

1. First, install the Side Rib Brace to your base mount as instructed here.
2. Align the screw at the base of the Side Rib with the corresponding thread on the left or right of the Side Rib Brace.
3. Use a 4mm Hex Key to secure the Side Rib in place.