ProMediaGear VSCS-N3 Shutter Release Cable for PMG-DUO Motor Drive

Cable Releases for VSMDC1 Slider Motor Controller.

The controller uses standard 2.5mm Shutter Cable releases. These are needed for time-lapse photography. The camera will only be triggered when motor is idle so that during long exposures you get sharp images.

Appropriate model needed for specific camera, check your manual or visually inspect port which cable is applicable.

• CSE3 - E3 Plug 2.5mm (Cable Shutter)
  • Canon Rebel Cameras like 600D, 700D, T5i, T6i etc
  • Canon Powershot G1x, G10-12
  • Pentax: 645D, ist D, ist DL, ist DL2, ist DS, ist DS2, K-30, K-5, K-5 II, K-5 IIs, K-50, K-500, K-7, K-m, K10 Grand Prix, K100D, K100D Super, K10D, K1 10D, K200D, K20D, MZ-6, MZ-L, ZX-L,
  • Samsung: GX-1L, GX-1S, GX-20, NX-10, NX-100, NX-11, NX-5
  • SD1, SD1 Merrill, SD15, D1, Sigma SD1 Merrill, Sigma SD15
• CSN3  Canon N3 type plug 3 pin connector
  • Canon EOS 1D Series, 5D Series, 7D, 50D, 40D, 30D, 20D
• CSDC0  Nikon Type shutter connector
  • D1 Series, D3, D2, D700, D300, D800,
• CSDC2  Nikon Type Shutter Connector
  • D7000, D7100, D5100, D5200, D750
• CSS1  Sony Alpha type cameras
  • DSLR-A900, DSLR-A850, DSLR-A700, DSLR-A580, DSLR-A560, DSLR-A550, DSLR-A450, DSLR-A350, DSLR-A300, DSLR-A200, DSLR-A100, SLT-A99, Other SLT-Models

Used for Timelapse photography.